Trigger (TRIG)

Triggers a station and takes a new picture and does not wait for the end of the inspection.

Input

Syntax: TRIG{SLOTNUMBER}

{SLOTNUMBER}

Corresponds to the station number. If -1, all stations are controlled.

Output

Command Response	Description
0	Command was processed successfully
1	Execute not successful
2	Incorrect syntax
3	Serious error during execution
4	Function not active or manually deactivated
9	EasySightPro® will be closed

Example

Acquires a new image for station 0. The response 0 is sent immediately after the image acquisition is started.

Acquires a new image for all stations. The response 0 is sent immediately after the image acquisition is started.