Cognex CIC
The camera can alternatively be supplied via POE (Power over Ethernet), whereby the supply via the IO port is preferred internally.
Information: A special IO cable (COG-IO-CBL-6P-PLC) is required to trigger the camera via digital hardware input.
| Pin | Color | Description | Connection from / to | Comment |
|---|---|---|---|---|
| 1 | Brown | Power VCC | Power supply +24V | |
| 2 | Pink | IN 1 | Hardware Trigger | Optional trigger signal +24V |
| 3 | Not connected | |||
| 4 | Yellow | OUT 1 | Output 1 for lighting 1 | Illumination 1 |
| 5 | Gray-Green | IO GND | Power supply GND | |
| 6 | White | Power GND | Power supply GND |
Illumination with optocoupler
A fast optocoupler can be used to control the lighting.
| Terminal | Type | Connection from / to | Comment |
|---|---|---|---|
| A1 | Input + | Power supply +24V | |
| A2 | Input - | Output 1 for illumination 1 (Yellow) | Switching output of the camera |
| 13+ | +24V | Power supply +24V | |
| 14 | Output | Illumination +24V | +24V of the illumination |
Illumination with Gardasoft lightning controller
Depending on the lightning controller, a different number of channels is available. The channel used is not relevant for the wiring and can be freely selected.
| Terminal | Type | Connection from / to | Comment |
|---|---|---|---|
| TRIG1+ | Input | Power supply +24V | |
| TRIG1- | Input | Outptu 1 for illumination 1 (Yellow) | Switching output of the camera |
| LED1+ | Output | Illumination +24VDC | Direct connection of the illumination |
| LED1- | Output | Illumination GND | Direct connection of the illumination |