Commands
Information: Spaces and NULL characters (0x00) are ignored at the beginning and end of the command.
Camera control
| Command | Description |
|---|---|
| GetCameraContrast (GCC) | Queries the camera contrast (exposure setting) for a station. |
| GetCameraExposure (GCE) | Queries the camera exposure time (exposure setting) for a station. |
| GetCameraFeature (GCF) | Queries a camera feature (internal camera setting) for a station. |
| SetCameraContrast (SCC) | Sets the camera contrast (exposure setting) for a station. |
| SetCameraExposure (SCE) | Sets the camera exposure time (exposure setting) for a station. |
| SetCameraFeature (SCF) | Sets a camera feature (internal camera setting) for a station. |
Program Cache
| Command | Description |
|---|---|
| CacheAllJobs (CAJ) | Loads all programs of all stations into the temporary memory. |
| CacheJobByName (CJ) | Loads a program of a station into the temporary memory. The selection is made by program name. |
| CacheJobByNumber (CNJ) | Loads a program of a station into the temporary memory. The selection is made by program number. |
| ClearCache (CC) | Deletes all programs from the temporary memory. |
| UncacheJobByName (UCJ) | Unloads a program of a station from the temporary memory. The selection is made by program name. |
| UncacheJobByNumber (UCNJ) | Unloads a program of a station from the temporary memory. The selection is made by program number. |
Program management
| Command | Description |
|---|---|
| DeleteJobByName (DELJ) | Deletes a program of a station. The selection is made by program name. |
| DeleteJobByNumber (DELNJ) | Deletes a program of a station. The selection is made by program number. |
| DuplicateJobByName (DUBJ) | Duplicates a program of a station. The selection is made by program name. |
| DuplicateJobByNumber (DUBNJ) | Duplicates a program of a station. The selection is made by program number. |
| SetJobAsStartupByName (SJAS) | Activates a program as startup program for a station. The selection is made by program name. |
| SetJobAsStartupByNumber (SJNAS) | Activates a program as startup program for a station. The selection is made by program number. |
Station control
| Command | Description |
|---|---|
| GetData (GETDATA) | Queries the last test result of a station. |
| GetDataTag (GETDATATAG) | Query a partial result (EasyOutput Tag) of the last test result. |
| GetEasyInputToolValue (GEIT) | Queries an input (EasyInputTool parameter) in the active inspection programme. |
| GetSlotState (GSS) | Queries the current status of a station. |
| GetSlotStateExtended (GSSE) | Queries the current extended status of a station. |
| ResetUnsavedJobFlag (RUJF) | Clears the "Program not saved" feature for a station. |
| SaveActiveJob (SAJ) | Saves all changes to the current programme. |
| SetEasyInputToolValue (SEIT) | Sets an input (EasyInputTool parameter) in the active inspection programme and triggers the 'Programme changed' flag. |
| SetEasyToolTerminal (SETT) | Sets an input value in a compatible EasyTool in the active inepction programme and triggers the 'Programme changed' flag. |
| SetJob (SJ) | Loads a program by name into a station. |
| SetJobByNumber (SNJ) | Loads a program by number into a station. |
| SetSlot (SS) | Activates a single station. The station of the other stations is not changed. |
| SetSlotAll (SSA) | Activates all stations at once. |
| SetSlotSingle (SSS) | Activates one station and deactivates all others. With this command only the selected station is online and all others are offline. |
| SetTag (ST) | Sets an input (EasyInput Tag) in the active program. |
| SetToolState (STS) | Activates/deactivates a value tool in the active program of a station. |
| Trigger (TRIG) | Triggers a station and takes a new picture and does not wait for the end of the test. |
| TriggerAndWait (TRIGW) | Triggers a station and takes a new picture and waits for the end of the test. |
System
| Command | Description |
|---|---|
| Clear (CLEAR) | Clears the display of the station in the user interface. |
| CreateBackup (CREATEBACKUP) | Creates a new backup of the complete configuration. |
| SetJobSlotCommand (SJC) | EasySightPro® JobSlot modules provide their own command interface for custom implementations. |
| GetRegister (GR) | Initializes the controller shutdown. |
| SetRegister (SR) | Sets the value of an EasyRegister. |
| EspRestart (ESPRESTART) | Restarts EasySightPro®. |
| SystemReboot (SYSTEMREBOOT) | Initialises the reboot of the controller. |
| SystemShutdown (SYSTEMSHUTDOWN) | Initialises the shutdown of the controller. |
| Log out user (UILOGOUT) | Logs out the current user and switches to the standard user. |
| Log in user (UILOGIN) | Logs in a new user into EasySightPro®. |